Welcome to the Linux Foundation Forum!

Horizon GUI cant be reached, though the installation was successful

pparasar
pparasar Posts: 2

The stack.sh script ran successfully. Data from /opt/stack/logs/stack.sh.log

This is your host IP address: 192.168.97.1

This is your host IPv6 address: 2001:4800:780e:510:be76:4eff:fe04:6bd1

Horizon is now available at http://192.168.97.1/dashboard

Keystone is serving at http://192.168.97.1:5000/

The default users are: admin and demo

The password: openstack

But I cannot reach the  dashboard. The ip address is not pingable 192.168.97.1

 

Comments

  • pparasar
    pparasar Posts: 2
    edited August 2016

    I gave the  wrong ip address in the local.conf file  . I can access openstack on eth0 inteface

  • serewicz
    serewicz Posts: 1,000

    Glad to hear it! 

  • ShishirSomashekar
    edited December 2016

    @pparasar - what IP you had given before and to what did you change it to make it work ? because I am also facing same issue

    I have given eth2 ip address in the local.conf file ( copy pasted from lab doc, no manual change done )

  • serewicz
    serewicz Posts: 1,000

    Hello,

    I think you will find that the 192.168. address is a non-Internet routable IP address. You will need to use the IP address found on eth0 to gain access to the lab system. 

    As it mentions in the start of the lab you are accessing a remote lab environment. There are internal IP addresses used to communicate between nodes (192.168.) and Public IP addresses used to gain access to the node from the outside world.  

    Use the public IP address in your local browser to connect to the dashboard.

  • ShishirSomashekar
    edited December 2016

    Hi, It is still not working for me.

    I am using eth2 IP in local.conf file and eth0 IP in local browser.

  • np9137
    np9137 Posts: 2

    Hello,

     

    I am facing the exact same issue. Can you please tell me if you managed to access the dashboard?

    Thanks!

    Alexandra

  • kenhaben
    kenhaben Posts: 2
    edited March 2017

    exact same issue as above.... help want to take the class

     

    Thanks... Ken

  • kenhaben
    kenhaben Posts: 2
    edited March 2017

    Can Ping Dashboard address, but can't get to Dashboard GUI  166.78.27.106

    The site can't be reached

    166.78.27.106 took too long to respond

  • serewicz
    serewicz Posts: 1,000
    edited March 2017

    The updated version of the labs has been rolled out. Please clear your browser cache to ensure they can access the updated course version.

  • sudlaw098
    sudlaw098 Posts: 1

    hi all,

    i have installed multinode openstack newton setup. The setup was successful, but i am not able to access the dashboard of the controller node. Does anyone know this issue?

  • serewicz
    serewicz Posts: 1,000

    Hello,

    There are a few interfaces available. Could you let us know which interface you used, and the output of ip addr show <interface>?

    Regards,

     

Categories

Upcoming Training