Welcome to the Linux Foundation Forum!

Horizon GUI cant be reached, though the installation was successful

pparasar
pparasar Posts: 2
edited September 2016 in LFS252 Class Forum - Discontinued

The stack.sh script ran successfully. Data from /opt/stack/logs/stack.sh.log

This is your host IP address: 192.168.97.1

This is your host IPv6 address: 2001:4800:780e:510:be76:4eff:fe04:6bd1

Horizon is now available at http://192.168.97.1/dashboard

Keystone is serving at http://192.168.97.1:5000/

The default users are: admin and demo

The password: openstack

But I cannot reach the  dashboard. The ip address is not pingable 192.168.97.1

 

Comments

  • pparasar
    pparasar Posts: 2
    edited August 2016

    I gave the  wrong ip address in the local.conf file  . I can access openstack on eth0 inteface

  • ShishirSomashekar
    ShishirSomashekar Posts: 2
    edited December 2016

    @pparasar - what IP you had given before and to what did you change it to make it work ? because I am also facing same issue

    I have given eth2 ip address in the local.conf file ( copy pasted from lab doc, no manual change done )

  • ShishirSomashekar
    ShishirSomashekar Posts: 2
    edited December 2016

    Hi, It is still not working for me.

    I am using eth2 IP in local.conf file and eth0 IP in local browser.

  • np9137
    np9137 Posts: 2

    Hello,

     

    I am facing the exact same issue. Can you please tell me if you managed to access the dashboard?

    Thanks!

    Alexandra

  • kenhaben
    kenhaben Posts: 2
    edited March 2017

    exact same issue as above.... help want to take the class

     

    Thanks... Ken

  • kenhaben
    kenhaben Posts: 2
    edited March 2017

    Can Ping Dashboard address, but can't get to Dashboard GUI  166.78.27.106

    The site can't be reached

    166.78.27.106 took too long to respond

  • sudlaw098
    sudlaw098 Posts: 1

    hi all,

    i have installed multinode openstack newton setup. The setup was successful, but i am not able to access the dashboard of the controller node. Does anyone know this issue?

Categories

Upcoming Training