Horizon GUI cant be reached, though the installation was successful

pparasar

The stack.sh script ran successfully. Data from /opt/stack/logs/stack.sh.log

This is your host IP address: 192.168.97.1

This is your host IPv6 address: 2001:4800:780e:510:be76:4eff:fe04:6bd1

Horizon is now available at http://192.168.97.1/dashboard

Keystone is serving at http://192.168.97.1:5000/

The default users are: admin and demo

The password: openstack

But I cannot reach the  dashboard. The ip address is not pingable 192.168.97.1

 

pparasar

I gave the  wrong ip address in the local.conf file  . I can access openstack on eth0 inteface

serewicz

Glad to hear it! 

ShishirSomashekar

@pparasar - what IP you had given before and to what did you change it to make it work ? because I am also facing same issue

I have given eth2 ip address in the local.conf file ( copy pasted from lab doc, no manual change done )

serewicz

Hello,

I think you will find that the 192.168. address is a non-Internet routable IP address. You will need to use the IP address found on eth0 to gain access to the lab system. 

As it mentions in the start of the lab you are accessing a remote lab environment. There are internal IP addresses used to communicate between nodes (192.168.) and Public IP addresses used to gain access to the node from the outside world.  

Use the public IP address in your local browser to connect to the dashboard.

ShishirSomashekar

Hi, It is still not working for me.

I am using eth2 IP in local.conf file and eth0 IP in local browser.

np9137

Hello,

 

I am facing the exact same issue. Can you please tell me if you managed to access the dashboard?

Thanks!

Alexandra

kenhaben

exact same issue as above.... help want to take the class

 

Thanks... Ken

kenhaben

Can Ping Dashboard address, but can't get to Dashboard GUI  166.78.27.106

The site can't be reached

166.78.27.106 took too long to respond

serewicz

The updated version of the labs has been rolled out. Please clear your browser cache to ensure they can access the updated course version.

sudlaw098

hi all,

i have installed multinode openstack newton setup. The setup was successful, but i am not able to access the dashboard of the controller node. Does anyone know this issue?

serewicz

Hello,

There are a few interfaces available. Could you let us know which interface you used, and the output of ip addr show <interface>?

Regards,