Doubt regarding lab 44.4

Hi @iri36, are you working on a bare metal system or on a VM? For GPT systems there is a note in the PDF for that lab:

The following instructions for an MBR system. if you have GPT you need to use sgdisk with the --backup-file and --load-backup options as discussed in the partitioning chapter

Regards,
Luis.

Hi @iri36,

I'm working with a VM with Ubuntu 20.04 in VirtualBox. I used sgdisk with --backup and --load-backup as suggested in the lab. My problem was that the backup file was created in the /home dir which was in the dev/sda and after deleting the partition table, I could not mount the device and therefore could not access my backup file.

Oh, hehehe, I see. So you need to save the backup file to another place and partition. If /tmp is a separated partition, you can put it there, or to any other partition that can work for this purpose.

BTW, in the GPT system, how do I delete the GPT table? I used "sgdisk --clear /dev/sda" but I'm not sure if this is the right way to do it. Thanks!

Per the man page you are correct:

-o, --clear
Clear out all partition data. This includes GPT header data, all partition definitions, and the protective MBR.

Regards,
Luis.

It's a pleasure @iri36!!