Welcome to the Linux Foundation Forum!

Lab3: Error: Failed sending proposal, got rpc error: code = Unavailable desc = transport is closing

eecszc
eecszc Posts: 11
in LFS272 Class Forum

When doing Lab3's last part: "confirm your peers are still a part of the channel." and after i ran the command below in peer0
peer channel join -b allarewelcome.block
i got this problem:
Error: Failed sending proposal, got rpc error: code = Unavailable desc = transport is closing

I'v already set the identification path of peer0 to the admin of Org1 and pull the genesis block. aka
export CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/Admin@ ​org1.example.com/msp
peer channel fetch oldest ​allarewelcome ​. ​block ​ - ​c ​ ​allarewelcome -- ​orderer ​ ​orderer.example.com:7050

can someone help me out
thanks

Comments

  • Niklaskkkk
    Niklaskkkk Posts: 113

    @eecszc said:
    When doing Lab3's last part: "confirm your peers are still a part of the channel." and after i ran the command below in peer0
    peer channel join -b allarewelcome.block
    i got this problem:
    Error: Failed sending proposal, got rpc error: code = Unavailable desc = transport is closing

    I'v already set the identification path of peer0 to the admin of Org1 and pull the genesis block. aka
    export CORE_PEER_MSPCONFIGPATH=/etc/hyperledger/msp/users/Admin@ ​org1.example.com/msp
    peer channel fetch oldest ​allarewelcome ​. ​block ​ - ​c ​ ​allarewelcome -- ​orderer ​ ​orderer.example.com:7050

    can someone help me out
    thanks

    Seems like your fabric images are too old, version 4.0. They need to be the newest version to be compatible with the newest couchdb configuration. Please check your images version by docker images -a
    If the peer image is not 4.4, please remove and install the newest version.
    The course material need to be updated by Linux to be compatible with couchdb upgrades.
    Hope this solves your issue.

  • eecszc
    eecszc Posts: 11

    @Niklaskkkk said:

    Seems like your fabric images are too old, version 4.0. They need to be the newest version to be compatible with the newest couchdb configuration. Please check your images version by docker images -a
    If the peer image is not 4.4, please remove and install the newest version.
    The course material need to be updated by Linux to be compatible with couchdb upgrades.
    Hope this solves your issue.

    I use just one peer (peer0) to test couchdb, and tracks the error with command
    docker logs -f --details peer0.org1.example.com
    when trying to join peer0 to the channel, i got this error:
    Error calling CouchDB CreateDatabaseIfNotExist() for dbName: allarewelcome_, error: error decoding response body: json: cannot unmarshal string into Go struct field DBInfo.purge_seq of type int.

    I searched and find the link below may be the reason:
    https://jira.hyperledger.org/browse/FAB-13196

    I haven't try the version4.4. hope it will work
    thanks

  • Niklaskkkk
    Niklaskkkk Posts: 113

    @eecszc said:

    @Niklaskkkk said:

    Seems like your fabric images are too old, version 4.0. They need to be the newest version to be compatible with the newest couchdb configuration. Please check your images version by docker images -a
    If the peer image is not 4.4, please remove and install the newest version.
    The course material need to be updated by Linux to be compatible with couchdb upgrades.
    Hope this solves your issue.

    I use just one peer (peer0) to test couchdb, and tracks the error with command
    docker logs -f --details peer0.org1.example.com
    when trying to join peer0 to the channel, i got this error:
    Error calling CouchDB CreateDatabaseIfNotExist() for dbName: allarewelcome_, error: error decoding response body: json: cannot unmarshal string into Go struct field DBInfo.purge_seq of type int.

    I searched and find the link below may be the reason:
    https://jira.hyperledger.org/browse/FAB-13196

    I haven't try the version4.4. hope it will work
    thanks

    Yes - then it is because you have the 1.4.0 version of hyperledger/fabric images. Upgrade to version 1.4.4 and the issue will go away.

  • manjushaawasthi
    manjushaawasthi Posts: 3
    edited December 2019

    @eecszc Were you able to resolve the issue by upgrading the peer fabric image to 1.4.4. I am getting the same issue, i tried upgrading my peer image to 1.4.4, but now when i try pulling the genesis block using peer channel fetch oldest allarewelcome.block -c allarewelcome --orderer orderer.example.com:7050, i get this error: Got status: &{NOT_FOUND} Error: can't read the block: &{NOT_FOUND}

  • manjushaawasthi
    manjushaawasthi Posts: 3

    Managed to resolve the issue. For anyone else facing it, this is how i solved it.
    1. Ran startup.sh, so that recreated the channel allarewelcome (and deleted all the existing peer containers)
    2. For both the peer definitions in docker-compose.yml file, i changed image: hyperledger/fabric-peer to image: hyperledger/fabric-peer:1.4.4
    After starting the peer containers, i was able to fetch the genesis block for allarewelcome channel, as also able to join it.
    Hope that helps!

  • eecszc
    eecszc Posts: 11

    @manjushaawasthi said:
    @eecszc Were you able to resolve the issue by upgrading the peer fabric image to 1.4.4. I am getting the same issue, i tried upgrading my peer image to 1.4.4, but now when i try pulling the genesis block using peer channel fetch oldest allarewelcome.block -c allarewelcome --orderer orderer.example.com:7050, i get this error: Got status: &{NOT_FOUND} Error: can't read the block: &{NOT_FOUND}

    yeah, it works, i forgot to post the result. sry :)
    it seems you have already solve your problem. congratulations

  • LasToronto
    LasToronto Posts: 11

    Sorry for this very basic question but I stuck with the same problem and I am not sure about:

    how to download the latest peer images?
    I used this command from Lab1 "curl -sSL http://bit.ly/2ysbOFE | bash -s 1.4.0" with modifying it to 1.4.4:
    curl -sSL http://bit.ly/2ysbOFE | bash -s 1.4.4

    It downloaded a bunch of stuff but the following remained on 1.4.0, as printout shows:
    hyperledger/fabric-javaenv 1.4.0 3d91b3bf7118 12 months ago 1.75GB
    hyperledger/fabric-tools 1.4.0 0a44f4261a55 12 months ago 1.56GB
    hyperledger/fabric-ccenv 1.4.0 5b31d55f5f3a 12 months ago 1.43GB
    hyperledger/fabric-orderer 1.4.0 54f372205580 12 months ago 150MB
    hyperledger/fabric-peer 1.4.0 304fac59b501 12 months ago 157MB
    hyperledger/fabric-ca 1.4.0 1a804ab74f58 12 months ago 244MB

    Should I have removed it before? Can you please help with the command how to remove it?
    Thanks,
    L.

  • Niklaskkkk
    Niklaskkkk Posts: 113

    @LasToronto said:
    Sorry for this very basic question but I stuck with the same problem and I am not sure about:

    how to download the latest peer images?
    I used this command from Lab1 "curl -sSL http://bit.ly/2ysbOFE | bash -s 1.4.0" with modifying it to 1.4.4:
    curl -sSL http://bit.ly/2ysbOFE | bash -s 1.4.4

    It downloaded a bunch of stuff but the following remained on 1.4.0, as printout shows:
    hyperledger/fabric-javaenv 1.4.0 3d91b3bf7118 12 months ago 1.75GB
    hyperledger/fabric-tools 1.4.0 0a44f4261a55 12 months ago 1.56GB
    hyperledger/fabric-ccenv 1.4.0 5b31d55f5f3a 12 months ago 1.43GB
    hyperledger/fabric-orderer 1.4.0 54f372205580 12 months ago 150MB
    hyperledger/fabric-peer 1.4.0 304fac59b501 12 months ago 157MB
    hyperledger/fabric-ca 1.4.0 1a804ab74f58 12 months ago 244MB

    Should I have removed it before? Can you please help with the command how to remove it?
    Thanks,
    L.

    Hi @LasToronto ,

    Yes, the script for downloading the course materiale needs to be updated by the Linux-team. I will notify them.

    In the meantime, so you can progress: remove each old image & replace it with the newest version. It is a bit time consuming, migth take you 10-15 minutes.

    Here are the commands:

    First type: docker images ps -a

    Remove: docker image rm --f hyperledger/fabric-ca

    Download new version: docker pull hyperledger/fabric-ca:latest

    You have to do this with all hyperledger images.

    Afterwards, run a new "docker images ps -a" to verify that you got version 1.4.4, or above

    You find all images here on this page: https://hub.docker.com/r/hyperledger/fabric-ca/tags

  • LasToronto
    LasToronto Posts: 11

    Hi @Niklaskkkk ,
    Thank you for the instruction. I believe I removed them and re-installed them but the result was the same.
    Just to make sure I did it right, can you tell me how to locate the fabric images?
    when issued docker images ps -a, I saw it was empty.
    Then downloaded them again but the version stayed the same 1.4.0

    I might have done something wrong (not sure). What would you suggest to validate it?
    Thank you a lot.

  • Niklaskkkk
    Niklaskkkk Posts: 113

    @LasToronto said:
    Hi @Niklaskkkk ,
    Thank you for the instruction. I believe I removed them and re-installed them but the result was the same.
    Just to make sure I did it right, can you tell me how to locate the fabric images?
    when issued docker images ps -a, I saw it was empty.
    Then downloaded them again but the version stayed the same 1.4.0

    I might have done something wrong (not sure). What would you suggest to validate it?
    Thank you a lot.

    You can see your images by typing:

    "docker images" in your terminal. There you also see the image version.

    I just tested running the network on version 1.4.4, so it all works with 1.4.4 images.

    To download specific image version, here is an example: "docker pull hyperledger/fabric-ca:1.4.4"

  • terany
    terany Posts: 5

    I was stuck on the mismated version of couchDB and peer, which 1.4.4 should be applied. This thread is very important and should be pinned !!!

  • kalyani.guddanti
    kalyani.guddanti Posts: 1

    I have upgraded my peers to 1.4.4 and couchDB to latest version, but still I am facing this error - Error: error endorsing chaincode: rpc error: code = Unavailable desc = transport is closing
    Can someone please help

  • terany
    terany Posts: 5

    @kalyani.guddanti said:
    I have upgraded my peers to 1.4.4 and couchDB to latest version, but still I am facing this error - Error: error endorsing chaincode: rpc error: code = Unavailable desc = transport is closing
    Can someone please help

    FYI, here are the image signatures which are working,

    hyperledger/fabric-couchdb latest b967e8b98b6b 6 weeks ago 261MB
    hyperledger/fabric-tools 1.4.4 7552e1968c0b 9 months ago 1.49GB
    hyperledger/fabric-ccenv 1.4.4 ca4780293e4c 9 months ago 1.37GB
    hyperledger/fabric-orderer 1.4.4 dbc9f65443aa 9 months ago 120MB
    hyperledger/fabric-peer 1.4.4 9756aed98c6b 9 months ago 128MB

  • Niklaskkkk
    Niklaskkkk Posts: 113

    @kalyani.guddanti said:
    I have upgraded my peers to 1.4.4 and couchDB to latest version, but still I am facing this error - Error: error endorsing chaincode: rpc error: code = Unavailable desc = transport is closing
    Can someone please help

    Hi @kalyani.guddanti ,

    Have you tried the signatures terany recommended above? If that also does not work, it might be something else. For instance check your orderer log and let me know what it says.

    Also, what Ubuntu version are you on?

Categories

Upcoming Training