Welcome to the Linux Foundation Forum!

lab 2 web interface issue

pxm5336
pxm5336 Posts: 3

at the end of lab 2 task 5 of opening web interface using eth0 address is not working, can someone help?

 

eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast

 state UP group

 default qlen 1000

 link/ether bc:76:4e:04:b3:be brd ff:ff:ff:ff:ff:ff

   inet 192.237.214.15/24 brd 192.237.214.255 scope global eth0

   valid_lft forever preferred_lft forever

   inet6 2001:4800:7813:516:be76:4eff:fe04:b3be/64 scope global

     valid_lft forever preferred_lft forever

   inet6 fe80::be76:4eff:fe04:b3be/64 scope link

  valid_lft forever preferred_lft forever



 https://192.237.215.15/



 Above http does not work?

Comments

  • serewicz
    serewicz Posts: 1,000
    edited June 2017

    Hello,

    From what you pasted into the topic above you are trying to access the https site, not the http site. Be default the secure page is not configured.  

    If the non-secure URL doesn't work double check that the ./stack.sh script completed without error.  

    Regards,

     

  • pxm5336
    pxm5336 Posts: 3
    edited June 2017

    working now, thanks :) 

Categories

Upcoming Training