Welcome to the Linux Foundation Forum!

Vantec NexStar CX USB HDD Enclosure

Posts: 216

Does anyone have one of these, in either the 2.5 or 3.5 variety?

I'm curious about:

[ul]

[li]the chipset that it uses[/li]

[li]I/O thruput[/li]

[li]gotchas...[/li]

[/ul]

thanks!

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Comments

  • Posts: 501
    Have you checked on the manufacturer's web site for technical specs? This is not an enclosure I'm familiar with. Mostly I use StarTech enclosures.
  • Posts: 216
    woboyle wrote:
    Have you checked on the manufacturer's web site for technical specs? This is not an enclosure I'm familiar with. Mostly I use StarTech enclosures.
    Yeah, I checked - their website did not have much in the way of details. I am interested in performance (specifically write speed), and a colleague told me he got ~45MB/sec (using a 7200RPM Hitachi Travelstar) with the 2.5" variety of these, very nice. Meanwhile, I am seeing ~25-30MB/sec using the same drive with other enclosures (don't have them in front of me, and can't remember the models). Anyway, I need capacity >=1 TB, so I need a 3.5" solution, and wasn't sure if their 3.5" and 2.5" enclosures use the same chipset - I assume so, but was just wondering...thanks.
  • Posts: 1
    I haven't been able to test the transfer rates as I have just installed the external drive. One thing I have noticed, and cannot find a solution to, is that it does not work with Ubuntu. I have tried it with Karmic 9.10 and Lucid 10.04 Alpha 3 with no success. I will try it on my laptop next and see if it is a hardware issue on my desktop. If it does not work on either, it is possible that it si the hard drive that it cannot detect.

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Categories

Upcoming Training