Lab 3.4 - Deploy a Simple Application
I'm having trouble viewing the output of nginx via curl inside the master node, I'm using GCP and the firewall rule allows access to everything, what am I doing wrong?
when I use tcpdump it receives the request but there is no content from the webserver
Regards,
Rousseau
Comments
-
Hi @rbraga,
Can you also provide screenshots of your Firewall rules and VPC settings?
Regards,
-Chris0 -
Hi of course I'll show you
0 -
Your infra config looks ok.
Is there an OS firewall that may be enabled?
Are your nodes ready and all your control plane pods running ok?kubectl get nodes
kubectl get pods -Ao wide
Regards,
-Chris0 -
Hi Chris check out below
I cleared the firewall rule
I checked the firewall's rules, there were rules that ubuntu itself initializes, so I cleaned them all, but I still don't see the content using curl, I entered the pod shell using kubectl exec and I can see the output using localhost curl
Regards,
-Rousseau0 -
Hello,
As the pod appears to be running perhaps there is something else at issue. Use the Pod IP from the kubectl get pod -o wide and curl to test if you can see the web page via the PodIP.
If that works, look at the endpoints, kubectl get ep and kubectl get svc. The service IP should forward traffic to the endpoint IP of your pod.
How did you create the service? Did you use kubectl expose or via a YAML file. Delete the service, test that direct to Pod IP works, then create the service again using kubectl expose. Does it work then?
Regards,
0 -
Hi @serewicz
I created the service as described in the lab's pdf, just using kubectl expose deployment / nginx, I also deleted the service and it doesn't work, do I have to change the default.conf of nginx ??
I already did this pdf activity in GCP as in the cluster in my work the result is the same.I can't believe that I've been stuck in this activity for a few days trying to find out why the result doesn't come out the same as the PDF.
regards
0 -
Hi @rbraga,
Your latest snapshots reveal that the issue may be caused by the way the networking is setup.
Your Pod IPs are from the 10.234.x.x subnet. What is the size of the Pod network, as setup by your CNI plugin and as it was included in the
kubeadm init
command?Also, it seems that the Service Cluster IPs are also from the same network 10.234.x.x.
If the Pod network and the Services network overlap, this may cause routing issues when the Service is attempting to forward the request to its Endpoint Pod(s).In a cluster the Node IP addresses, the Pod network from the CNI plugin, and the Service Cluster IP network should not overlap, they should all be distinct.
Regards,
-Chris0 -
Hi @rbraga,
On GCP, you seem to have the following config:
Your VPC is 10.21.0.0/16 so the expected VM IP addresses should be from this subnet (from the VPC Network details). The firewall rule to allow all traffic is also set for this VPC network.
Your Node IP addresses were 10.158.0.2 and 10.158.0.3 - not part of the VPC, and not under the firewall rule defined earlier.
Was all this intentional? Or do you have different VPC networks, with different Firewall rules?
Regards,
-Chris0 -
Hi @chrispokorni
These last screenshots are from a my personal server that I built with rancher and it is not GCP, I'll do it at GCP again following the course video again to see if I can get the same result.0 -
I deleted all the VM's and redid it all again and it worked.
thanks for all the help
Regards
1
Categories
- All Categories
- 51 LFX Mentorship
- 104 LFX Mentorship: Linux Kernel
- 576 Linux Foundation IT Professional Programs
- 304 Cloud Engineer IT Professional Program
- 125 Advanced Cloud Engineer IT Professional Program
- 53 DevOps Engineer IT Professional Program
- 61 Cloud Native Developer IT Professional Program
- 5 Express Training Courses
- 5 Express Courses - Discussion Forum
- 2K Training Courses
- 19 LFC110 Class Forum
- 7 LFC131 Class Forum
- 27 LFD102 Class Forum
- 158 LFD103 Class Forum
- 20 LFD121 Class Forum
- 1 LFD137 Class Forum
- 61 LFD201 Class Forum
- 1 LFD210 Class Forum
- LFD210-CN Class Forum
- 1 LFD213 Class Forum - Discontinued
- 128 LFD232 Class Forum
- LFD237 Class Forum
- 23 LFD254 Class Forum
- 611 LFD259 Class Forum
- 105 LFD272 Class Forum
- 1 LFD272-JP クラス フォーラム
- 1 LFD273 Class Forum
- 2 LFS145 Class Forum
- 24 LFS200 Class Forum
- 739 LFS201 Class Forum
- 1 LFS201-JP クラス フォーラム
- 11 LFS203 Class Forum
- 75 LFS207 Class Forum
- 300 LFS211 Class Forum
- 54 LFS216 Class Forum
- 47 LFS241 Class Forum
- 41 LFS242 Class Forum
- 37 LFS243 Class Forum
- 11 LFS244 Class Forum
- 36 LFS250 Class Forum
- 1 LFS250-JP クラス フォーラム
- LFS251 Class Forum
- 140 LFS253 Class Forum
- LFS254 Class Forum
- 1.1K LFS258 Class Forum
- 10 LFS258-JP クラス フォーラム
- 93 LFS260 Class Forum
- 132 LFS261 Class Forum
- 33 LFS262 Class Forum
- 80 LFS263 Class Forum
- 15 LFS264 Class Forum
- 11 LFS266 Class Forum
- 18 LFS267 Class Forum
- 17 LFS268 Class Forum
- 23 LFS269 Class Forum
- 203 LFS272 Class Forum
- 1 LFS272-JP クラス フォーラム
- LFS274 Class Forum
- LFS281 Class Forum
- 236 LFW211 Class Forum
- 172 LFW212 Class Forum
- 7 SKF100 Class Forum
- SKF200 Class Forum
- 903 Hardware
- 219 Drivers
- 74 I/O Devices
- 44 Monitors
- 116 Multimedia
- 209 Networking
- 101 Printers & Scanners
- 85 Storage
- 763 Linux Distributions
- 88 Debian
- 66 Fedora
- 15 Linux Mint
- 13 Mageia
- 24 openSUSE
- 142 Red Hat Enterprise
- 33 Slackware
- 13 SUSE Enterprise
- 357 Ubuntu
- 479 Linux System Administration
- 41 Cloud Computing
- 70 Command Line/Scripting
- Github systems admin projects
- 95 Linux Security
- 78 Network Management
- 108 System Management
- 49 Web Management
- 68 Mobile Computing
- 23 Android
- 30 Development
- 1.2K New to Linux
- 1.1K Getting Started with Linux
- 537 Off Topic
- 131 Introductions
- 217 Small Talk
- 21 Study Material
- 826 Programming and Development
- 278 Kernel Development
- 514 Software Development
- 928 Software
- 260 Applications
- 184 Command Line
- 3 Compiling/Installing
- 76 Games
- 316 Installation
- 61 All In Program
- 61 All In Forum
Upcoming Training
-
August 20, 2018
Kubernetes Administration (LFS458)
-
August 20, 2018
Linux System Administration (LFS301)
-
August 27, 2018
Open Source Virtualization (LFS462)
-
August 27, 2018
Linux Kernel Debugging and Security (LFD440)