Welcome to the Linux Foundation Forum!

Section 2.1 cannot launch BUI - new session/site can't be reached

curtweikart
curtweikart Posts: 1
edited March 2018 in LFS252 Class Forum - Discontinued

1. Initial install of Openstack - devstack version PIKE -  using./stack.sh

2. Install completes, no issues

3. Launched the dashboard (192.168.97.1), and it times out.

Other Notes,

Section 2.1,this command is not working on the lab setup. 

ubuntu@devstack-cc:~/devstack$ ip addr show ens3

Device "ens3" does not exist.

Comments

  • nicolas.melchior
    nicolas.melchior Posts: 2

    try ip addr show, You'll see all interfaces

     

    By the way in the lab notes for section 2.1 I see " ip addr show eth2"

    Where did you get your lab notes?

  • mbay25
    mbay25 Posts: 2
    edited April 2018

    I'm having the same issue. I see this from the command:


    ubuntu@devstack-cc:~/devstack$ ip addr show ens3
    Device "ens3" does not exist.

    My problem is the public IP for eth0 points to an existing site for some security company...


    ubuntu@devstack-cc:~/devstack$ ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether bc:76:4e:04:5c:30 brd ff:ff:ff:ff:ff:ff
        inet 198.101.238.29/24 brd 198.101.238.255 scope global eth0
           valid_lft forever preferred_lft forever
        inet6 2001:4800:7810:512:be76:4eff:fe04:5c30/64 scope global
           valid_lft forever preferred_lft forever
        inet6 fe80::be76:4eff:fe04:5c30/64 scope link
           valid_lft forever preferred_lft forever
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether bc:76:4e:04:5e:0d brd ff:ff:ff:ff:ff:ff
        inet 10.100.32.23/20 brd 10.100.47.255 scope global eth1
           valid_lft forever preferred_lft forever
        inet6 fe80::be76:4eff:fe04:5e0d/64 scope link
           valid_lft forever preferred_lft forever
    4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether bc:76:4e:04:49:ed brd ff:ff:ff:ff:ff:ff
        inet 192.168.97.1/24 brd 192.168.97.255 scope global eth2
           valid_lft forever preferred_lft forever
        inet6 fe80::be76:4eff:fe04:49ed/64 scope link
           valid_lft forever preferred_lft forever
    5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
        link/ether 52:54:00:63:bd:36 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
           valid_lft forever preferred_lft forever
    6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000
        link/ether 52:54:00:63:bd:36 brd ff:ff:ff:ff:ff:ff
    7: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1
        link/ether 16:c8:f3:4d:8e:47 brd ff:ff:ff:ff:ff:ff
    8: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1
        link/ether 72:46:65:b6:21:4a brd ff:ff:ff:ff:ff:ff
    9: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1
        link/ether da:87:53:68:b7:4c brd ff:ff:ff:ff:ff:ff
        inet 192.168.42.129/25 scope global br-ex
           valid_lft forever preferred_lft forever
        inet6 2001:db8::2/64 scope global
           valid_lft forever preferred_lft forever
        inet6 fe80::d887:53ff:fe68:b74c/64 scope link
           valid_lft forever preferred_lft forever
    10: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1
        link/ether ea:05:6a:36:1d:4b brd ff:ff:ff:ff:ff:ff

    Trying to navigate to 198.101.238.29 doesn't take me to the Horizon dashboard, but rather the login landing page for some company called MSS CRM...

  • anumodputhukulam
    anumodputhukulam Posts: 13

    In section 2.1 When I click the "Launch Lab Environment" it encountered the errors "Forbidden
    You don't have the permission to access the requested resource. It is either read-protected or not readable by the server    "
    Could you please assist me on this to launch the lab.

  • anumodputhukulam
    anumodputhukulam Posts: 13

    When clicked "Launch Lab Environment" https://dfw-labs-2.exams.linuxtrainingservices.org/course/LFS252/lab2 URL is not working says errors "Forbidden
    You don't have the permission to access the requested resource. It is either read-protected or not readable by the server"    .

  • fcioanca
    fcioanca Posts: 2,590

    Hi anumodputhukulam, when did you sign up for the course? If you just enrolled, it takes 1-2 business days to receive access.

  • anumodputhukulam
    anumodputhukulam Posts: 13

    I signed up for the course yesterday 01/09/2018(saturyday) so when will I get the access?

  • fcioanca
    fcioanca Posts: 2,590

    It takes 1-2 business days (Monday-Friday, no holidays) to get access. Please keep in mind that tomorrow is also a holiday in the US, so it does not count as a business day. By mid next week, you should have access.

  • anumodputhukulam
    anumodputhukulam Posts: 13

    The openstack training for this course is from Mirantis/Redhat/Canonical/Ubuntu/SUSE which one this openstack training belongs to ?

  • fcioanca
    fcioanca Posts: 2,590

    You signed up for LFS252, offered by The Linux Foundation

  • anumodputhukulam
    anumodputhukulam Posts: 13

    Ok thanks

  • anumodputhukulam
    anumodputhukulam Posts: 13

    Also could you please let me know the COA certification provided by Openstack foundation or any other vendor?

  • fcioanca
    fcioanca Posts: 2,590

    If you bought the bundle LFS252 plus COA, you will find all necessary information provided with your enrollment and in your portal. As far as certification provided by other vendors, please do your research online, as we cannot provide information related to non-LF products.

Categories

Upcoming Training