Problem printing to Brother DCP-J315W through USB port

HarveyP · October 2012

cannot open '/dev/lp0'

The printer is connected by USB. It is good in /etc/printcap but I get the above status from lpq -a and of course no paper is used in this exercise, so very green!

Seriously - I have installed the printer with the visual interface, apt-get, dpkg and despair of getting the printer going. Is it perhaps a function of the USB connection? Help!

HarveyP

rechil_colin · October 2012

There might be the wrong model/printer configuration is making this problems. Plz check.....
1. Check your loaded Modules

2. See if the USB Printer Driver is listed

3. Look at the Kernel Log for usb traffic

4. Look at the list of Attached Devices

However you can try this URL: http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/model_top/colormfc/dcpj315w_eu_as.html?reg=eu&c=eu_ot&lang=en&prod=dcpj315w_eu_as

HarveyP · October 2012

rechil_colin wrote:

...
1. Check your loaded Modules

2. See if the USB Printer Driver is listed

3. Look at the Kernel Log for usb traffic

4. Look at the list of Attached Devices
...

Please excuse my ignorance ...

How do I do each of these things?
I have checked "dpkg -l | grep Brother" which looked good and
/etc/printcap appears to have the correct entry for a usb printer

My apologies for not mentioning before - it is the 12.04.1 UBUNTU desktop.

HarveyP

Problem printing to Brother DCP-J315W through USB port

Comments

Categories

Upcoming Training

Kubernetes Administration (LFS458)

Linux System Administration (LFS301)

Open Source Virtualization (LFS462)

Linux Kernel Debugging and Security (LFD440)