Welcome to the Linux Foundation Forum!

Serial Com Port Problem ttySx

Hi all

CentOS 5 on a DSEB-DG motherboard

I am having trouble communicating with my APC UPS on /dev/ttyS0.

What I do know:

UPS and cables are ok they work ok on my other server. CentOS on a Intel S3210SH M/B

Comparing the serial ports in the Hardware browser I notice that the Working system (Intel) is listed as such

16500A-compatible Com port
16500A-compatible Com port
16500A-compatible Com port
16500A-compatible Com port


The non working system lists

16500A-compatible Com port
16500A-compatible Com port


The com ports are set in the bios as:

Com1 3F8/IRQ4

Com2 2F8/IRQ3

So I can see why the system does not work.

What I do NOT know:

How can I correct this problem. Do I need to re-install the drivers? if so HOW.

Thanks for taking the time to read this.

Dave

Comments

  • Posts: 158
    can you provide the output of the following commands:

    grep serial /var/log/dmesg

    and

    cat /proc/tty/driver/serial

    you may need to run both as root.
  • Posts: 158
    Also, your working board uses a SMSC SCH5027D to provide the serial port functionality. Do we know what Chip is on the Asus board?

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In

Categories

Upcoming Training