82815 Intel [SOLVED]

DrakeMagi

I install debian lenny base , aptitude install fluxbox , xserver-xorg-core xorg , xterm , synaptic , scite , hardinfo , pcman-fm , iceweasel .

haven't got to the backport yet

Trying get 3d working ,

Monitor is Samsung , SynxMaster 753df

keep geeting error: no screens

my xorg.conf

# 82815 Intel

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
#Load "dri"
Load "v4l"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "82815 Intel"
Driver "i810"
VideoRam 64000
Screen 0
EndSection

Section "Monitor"
Identifier "Monitor0"
HorizSync 30-75
VertRefresh 55-70
EndSection

Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "82815 Intel"
DefaultDepth 24

SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

gomer

I would, for now, try chaning the default depth to 16 to see if works any better. If that still fails, modify depth 16 and remove the "1280x1024" mode.

I also found this on-line, but be careful when playing around with mode-lines and sync and refresh rates. You may want to double check the manual for your monitor or the manufacturer's specs:

Section "Monitor"
Identifier "753DF"
VendorName "Samsung"
ModelName "Samsung SyncMaster 753DF(X)/703DF(X)/783DF(X)/CD173A(T)"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Gamma 1
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
Option "DPMS" "true"
EndSection

DrakeMagi

It working now. have not tried 1280x1024 mode
ModeLine wasn't needed

# 82815 Intel

Section "ServerLayout"
	Identifier "Default Layout"
	Screen 0 "Screen0" 0 0
	InputDevice "Generic Keyboard"
	InputDevice "Configured Mouse"
EndSection

Section "Module"
	Load "GLcore"
	Load "dbe"
	Load "extmod"
	Load "glx"
	Load "dri"
	Load "freetype"
	Load "v4l"
	Load "vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"82815 Intel"
	Driver 	"i810"
	VideoRam 64000
	Screen 0
EndSection

Section "Monitor"
	Identifier	"Monitor0"
	VendorName "Samsung"
	ModelName "Samsung SyncMaster 753df"
	HorizSync	30-70
	VertRefresh  50-160
	#ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
	Gamma 1
	Option "DPMS" "true"
EndSection

Section "Screen"
	Identifier	"Screen0"
	Monitor	"Monitor0"
	Device 	"82815 Intel"
	DefaultDepth 16
	
	SubSection "Display"
		Depth 1
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth 4
		Modes "1024X768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth 8
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth 15
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth 16
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth 24
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection