Welcome to the Linux Foundation Forum!

Lab 6.1: Chaincode for Report Generation couchdb errors

jjsull1van
jjsull1van Posts: 9
in LFD272 Class Forum

I am gettting the following error when running the Lab 6.1 step: peer chaincode query -n reports -C mychannel -c '{"Args":["getAnnualReport", "2019"]}' -o orderer.example.com:7050

-- Error ---

Error: endorsement failure during query. response: status:500 message:"unable to perform a rich query using the query string {\"selector\":{\"date\":{\"year\":2019}}, \"use_index\":[\"_design/indexYearDoc\", \"indexYear\"]}: GET_QUERY_RESULT failed: transaction ID: 9792d735c41af848b09a39fa642f1b45c9fef4d4c876c6866d530a853e39919a: ExecuteQuery not supported for leveldb"

I run command
[email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -n reports -C mychannel -c '{"Args":["generateCustomReport", "{\"selector\": {\"price\": {\"$lt\":0}}}"]}' -o orderer.example.com:7050

-- Error --

Error: endorsement failure during query. response: status:500 message:"unable to perform a rich query using the query string {\"selector\": {\"price\": {\"$lt\":0}}}: GET_QUERY_RESULT failed: transaction ID: abf4fe51e1c92170a0ca57647269172f72bf353c43a6608bacbcafc9b8d46b11: ExecuteQuery not supported for leveldb"
[email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer#

The Lab 6.1 steps below run fine.

[email protected]:~/go/src/github.com/hyperledger/fabric-samples/basic-network$ docker exec -it cli bash
[email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n reports -v 1.0 -p github.com/chaincode/reports_chaincode/go -l golang
2021-04-28 00:51:45.318 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2021-04-28 00:51:45.318 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
2021-04-28 00:51:45.558 UTC [chaincodeCmd] install -> INFO 003 Installed remotely response:
[email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode list --installed
Get installed chaincodes on peer:
Name: mycc, Version: 1.0, Path: github.com/chaincode/chaincode_example02/go/, Id: 476fca1a949274001971f1ec2836cb09321f0b71268b3762d68931c93f218134
Name: mycc, Version: 2.0, Path: github.com/chaincode/chaincode_example02/go/, Id: 9dd24a058c56bbafe0a4bb2479d58d6950f589b627b73c7029e010f460a7c7d3
Name: reports, Version: 1.0, Path: github.com/chaincode/reports_chaincode/go, Id: 5c890ce80a46326405bbcefa43b9cb52fb8e152bc1d71ebda9b137c2cd3ee24c
[email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode instantiate -n reports -v 1.0 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -c '{"Args":[]}' -o orderer.example.com:7050
2021-04-28 00:52:14.425 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2021-04-28 00:52:14.425 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc

Comments

  • Bobbijn
    Bobbijn Posts: 67

    @jjsull1van , Hi Jim, It looks like it is having issue with creating records in the ​Init​ function to populate the ledger with the initial data. When you finished adding records did you receive the "return​ shim.​Success​(​nil​)" Statement?

  • jjsull1van
    jjsull1van Posts: 9

    Is there a step to call the function to populate the records? I do not see a separate step. I only see the query

  • jjsull1van
    jjsull1van Posts: 9

    It looks like the records are populated in the Init function. Dose the Init run automatically on the install? My install successfully runs.

  • jjsull1van
    jjsull1van Posts: 9

    I mean instantiation runs the Init function. My Instantiation runs fine.

  • jjsull1van
    jjsull1van Posts: 9

    The install ran successfully
    The instantiate ran successfully. This is where the Init runs and adds the new records.
    The query returns an error

    ~/go/src/github.com/hyperledger/fabric-samples/first-network$ docker exec -it cli bash
    [email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n reports -v 1.0 -p github.com/chaincode/reports_chaincode/go -l golang
    2021-04-28 22:33:12.274 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
    2021-04-28 22:33:12.275 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
    2021-04-28 22:33:12.461 UTC [chaincodeCmd] install -> INFO 003 Installed remotely response:

    [email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode instantiate -n reports -v 1.0 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -c '{"Args":[]}' -o orderer.example.com:7050
    2021-04-28 22:33:31.915 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
    2021-04-28 22:33:31.915 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
    [email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -n reports -C mychannel -c '{"Args":["getAnnualReport", "2019"]}' -o orderer.example.com:7050

    Error: endorsement failure during query. response: status:500 message:"unable to perform a rich query using the query string {\"selector\":{\"date\":{\"year\":2019}}, \"use_index\":[\"_design/indexYearDoc\", \"indexYear\"]}: GET_QUERY_RESULT failed: transaction ID: ee08543ff6b3685d53192c2b7cc7b391070f6591c19a62b9d72223744bcc067c: ExecuteQuery not supported for leveldb"
    [email protected]:/opt/gopath/src/github.com/hyperledger/fabric/peer#

  • IlyaPatotski
    IlyaPatotski Posts: 11

    Hi @jjsull1van,

    Your error message states that rich queries are not supported by LevelDB. Make sure you followed the prerequisites for the lab correctly and started a network with CouchDB enabled as a state database.

    The exercise is based on basic-network, so check basic-network/docker-compose.yml file. It should define all CouchDB-related variables under peer1's environment section:

    peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      # <...>
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=
      # <...>

    Best regards,
    Ilya

Categories

Upcoming Training