Welcome to the Linux Foundation Forum!

Not able to access code material

jainsiddhanth
jainsiddhanth Posts: 1
edited March 2021 in LFD259 Class Forum

Trying to access the code using - wget https://training.linuxfoundation.org/cm/LFD259/LFD259V2021-01-26SOLUTIONS.tar.xz--user=xxxxx --password=xxxxx
Getting error - Username/Password Authentication Failed

Comments

  • reti
    reti Posts: 3
    edited March 2021

    You need to have space after .tar.xa file like wget https://training.linuxfoundation.org/cm/LFD259/LFD259_V2021-01-26_SOLUTIONS.tar.xz --user=xxxxxx --password=xxxxx

  • chrispokorni
    chrispokorni Posts: 2,153

    Hi @jainsiddhanth and @reti,

    Please be considerate when posting user id and password information on a public forum such as this one.

    If you pay close attention to the "Download" text box, it includes a note, warning you about a possible issue when copying and pasting the wget and the tar commands:

    Note: depending on your software, if you are cutting and pasting the above instructions, the underscores may disappear and be replaced by spaces, so you may have to edit the command line by hand!

    Regards,
    -Chris

  • reti
    reti Posts: 3

    okay Thank you

  • Hello Team, i am having a similar issue, can you please guide. What information should i share to help troubleshoot

  • @arvindssharma said:
    Hello Team, i am having a similar issue, can you please guide. What information should i share to help troubleshoot

    Actually for such issues of course material access, i would be better if there were an email ID to communicate !

  • coop
    coop Posts: 915

    This forum is monitored by the people you would want to email. So you would lose not gain as other enrollees often answer questions as well. Just be patient. it has only been 20 minutes since you posted

  • fcioanca
    fcioanca Posts: 1,886
    edited April 2021

    @arvindssharma If you cannot access the resource files using the command in the course (after making sure that the command is correct correct in your terminal; copy/paste from the pdf may cause issues, or introduce unwanted characters), you can always manually download them following the instructions in the Course Resources page in the introductory chapter.

  • Hello fcioanca, problem is that when i click on "Lessons" in the portal, i can only see the exam, i cant see any course Resources.

  • fcioanca
    fcioanca Posts: 1,886

    Hi @arvindssharma ,

    Your screenshot shows you signed up for the CKA exam. This is not a screenshot from LFD259 (you are posting in the LFD259 forum), nor from LFS258 (which is the prep course for CKA). If you are also enrolled in a training course, please access the course from the training portal and check out the course materials available.

    Regards,

    Flavia

    The Linux Foundation Training Team

  • Hi,

    I'm getting a 404: Not Found when trying to get the course materials using the following command;
    wget https://training.linuxfoundation.org/cm/LFD259/LFD259V2023-05-31SOLUTIONS.tar.xz --user=X --password=X

    With the user and password given in the course materials. Please advise.

  • mstepien
    mstepien Posts: 410
    edited June 2023

    Hi @ciarahoulihan,

    Depending on your software, if you are cutting and pasting the above commend from the PDF, the underscores may disappear and be replaced by spaces, so you may have to edit the command line by hand.

    You can also download course materials by following instructions in Chapter 1 > Course Information > Course Resources.

    Hope this helps.

    Regards,
    Magda
    The Linux Foundation Training Team

  • The URL part is as below plus you can you concatenate the credentials at the end
    https://cm.lf.training/LFD259/LFD259_V2023-09-05_SOLUTIONS.tar.xz

Categories

Upcoming Training